All Posts
Browse all blog posts
Home Assistant Zigbee Coordinator Guide: How to Choose, Place, and Pair Devices
A stable Home Assistant Zigbee network is decided before you pair a single device: the coordinator you buy, where you put it, and which stack drives it.
Z-Wave Hub and Home Assistant: How the Stack Really Works
For a z-wave hub home assistant setup, the dependable path is a local controller stick plus the Z-Wave JS driver — the radio and the software stack decide reliability, not the box.
Zigbee vs Z-Wave for Home Assistant: How to Choose Your Protocol
For most Home Assistant homes, zigbee vs z-wave is a trade-off between the widest and cheapest device catalog and a radio band with fewer interference headaches.
Zigbee Gateway Explained: How to Choose and Set Up a Coordinator
A zigbee gateway is the coordinator that runs your Zigbee mesh; the buying decision comes down to placement, integration support, firmware, and a backup path you can actually restore.
SMLIGHT SLZB-06M: What to Check Before You Buy
Judge the SMLIGHT SLZB-06M on placement, driver support and migration cost rather than spec-sheet numbers. This is the order to check them in before you buy.
Sonoff ZBDongle-E: Zigbee Coordinator Buying and Setup Guide
Sonoff ZBDongle-E is the budget default for a Home Assistant Zigbee coordinator, but it fits some setups better than others. Here is how to choose it, commission it and know its limits.
Zigbee Hub and Home Assistant: What to Compare First
Think of a zigbee hub as the radio that runs your mesh, not a second brain. Match it to your placement, firmware support and migration path, and Home Assistant stays in charge.